![]() In addition to this, if there is more than one person working on the job, a scaffold tower has enough room for the both of you. Whilst ladders are a useful tool, a scaffold tower is much more suitable for certain larger tasks – it provides you with a solid workspace to make working at height much easier – with space to store your tools also. The advantages of a scaffold tower generally come from its size and surface area. Let’s take a look at when a scaffold tower is best used, and how to use it ensuring your safety. However, they are not always necessary – sometimes a ladder is all that is needed and with both of these pieces of equipment being so useful it can be hard to know when to use each. They provide a more stable, larger surface to do work from when compared to ladders. Where the ground is soft, sandy, or uneven, proper support must be provided for more stability.ĪFTER MOVING A TOWER AND BEFORE USE, WHEELS MUST BE LOCKED APPROPRIATELY.Scaffold towers are an incredibly useful piece of equipment when it comes to doing work at height. Towers must only be used on stable, balanced, and firm surfaces.Don’t use ladders or steps on a scaffold working platform as this will cause the collapse and the tower to turn over.When working on the platform, make sure that the access hatch is closed properly and securely on the platform.First, make a proper observation and then proceed to move or shift ![]() While moving towers, always make sure that there are no portholes, obstructions, or overhead power lines in the way.Don’t exceed the manufacturers’ SWL for the tower.Never pull the tower along while standing on it, it is very unsafe and leads to some critical disaster.Don’t move the tower if workers/employees or materials are still on the working platform. The most unsafe acts most scaffold users practice are the improper and misuse of the scaffold.To make it more secure of the scaffold, tie the tower to a permanent and stable structure where applicable or required.Hoist materials up from the inside of the tower.Follow the manufacturer’s instructions on the base-to-height ratio.While climbing up or coming down from the scaffold, never use the outside parts of a tower – always use the stairway or ladder on the internal side of the structure.The gap between toe-boards and mid guardrails and between mid and top guardrails must not exceed 470mm.Ensure the platform is fully boarded out and guard rails and toe-boards are fitted if the working platform is over 2 meters high.Check that the outrigger is set correctly and secured.Make sure that the tower scaffold must not be used unless the wheels are locked properly.Ensure the tower is vertical and square/. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |